Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CFHeinemann Hydraulic Magnetic Series C Circuit Breakers Type CF Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CF-circuit breakers,potentiometers,contactor
Home > Products > Circuit Breakers > Heinemann Circuit Breakers > Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CF

Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CF

share

C Fcircuit breakers are designed for rear or front mounting with front-connected terminals.

They can be rear mounted with M4 or 8-32 screws or front mounted with M4 or 6-32.

C Fcircuit breakers are available in 1, 2, 3, 4, 5 or 6 pole execution.

Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CDM and CFM

Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CDM and CFM


Types CDM and CFM Conventional circuit breakers have two handle positions : ON and OFF. The new MID-TRIP version has three: - ON - ELECTRICAL OFF (MID-TRIP) - MANUAL OFF, which allows immediate visual identification of an electrically tripped circuit breaker (handle
Heinemann Hydraulic Magnetic Series J/S Circuit Breakers MAS and MES

Heinemann Hydraulic Magnetic Series J/S Circuit Breakers MAS and MES


â Ignition-protected for use aboard gasoline powered marine craft â MAS: Standard toggle handles similar to JA/S â MES: Sealed-mount bat handles similar to JE/S â Current ratings from 0.10 to30A â Sealed construction will withstand internal are without igniting an ex
Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-50-2 - 50 Amp

Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-50-2 - 50 Amp


The AM/R hydraulic-magnetic circuit breaker has been designed to meet the most rigorous international standards in accordance with the CE low-voltage directive. The new design incorporates larger internal component spacing while maintaining the form, fit and function interchangeably with the
Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JA/S

Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JA/S


Breakers in this series are suitable for ac/dc circuits to 250V 50/60Hz and to 65Vdc. They are rated at 0.02 to 30 amperes in either mode of operation.
Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JE/S

Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JE/S


â Sealed-mount breaker â Suited for environments where water spray and splash exist, ie. marine equipment â Panel cutout sealed by O-ring at the base of the threaded gland bushing â Bright metal ON/OFF switch plate is supplied as standard â 1, 2 and 3 pole(s)
Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CF

Heinemann Hydraulic Magnetic Series C Circuit Breakers Type CF


C Fcircuit breakers are designed for rear or front mounting with front-connected terminals. They can be rear mounted with M4 or 8-32 screws or front mounted with M4 or 6-32. C Fcircuit breakers are available in 1, 2, 3, 4, 5 or 6 pole execution.
Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JC/S

Heinemann Hydraulic Magnetic Series J/S Circuit Breakers JC/S


The rocker handle design of the Series JC/S breaker creates a clean, uncluttered appearance in both single and multi-pole configurations. Any combination of one-, two-, three- or four-pole Series JC/S breakers can be installed in a common panel cutout.
Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-20-2 - 20 Amp

Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-20-2 - 20 Amp


The AM/R hydraulic-magnetic circuit breaker has been designed to meet the most rigorous international standards in accordance with the CE low-voltage directive. The new design incorporates larger internal component spacing while maintaining the form, fit and function interchangeably with the
Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-25-2 - 25 Amp

Heinemann Hydraulic Magnetic AM/R Circuit Breakers Double Pole AM2-D3-A-25-2 - 25 Amp


The AM/R hydraulic-magnetic circuit breaker has been designed to meet the most rigorous international standards in accordance with the CE low-voltage directive. The new design incorporates larger internal component spacing while maintaining the form, fit and function interchangeably with the
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 87.3 ms